Wall Putty

ULTRA WALL CARE PUTTY is a white cement based polymer modified wall putty specially developed as a finish coat to cover unevenness and pinholes in plastered surfaces and to make the walls/ceilings ready for painting. As it is white, it can be treated as a base coat for painting. Wall putty contains finest quality minerals, white cement and polymers.

Unichem Chennai

Features

Coverage

UNICHEM WALL PUTTY Covers approximately 18-20 s.q.ft. per kg for 2 coats, maintaining a maximum thickness of 1-2 mm on smooth plaster surface.

Application Method

Application

Dampen the surface to be plastered with clean water, Allow excess water to drain off. • Using a steel trowel / blade, apply the above mix to a thickness of about 0.5 — 1 mm, Level and smoothen the surface and cure the first coat lightly after it dries • Apply the second coat of 0.5 —1 mm after the first coat has fully dried and set. In areas of high temperature & low humidity light curing for two days is recommended. • The thickness of each coat should not exceed 1 mm and total plaster thickness should not exceed 2 mm. • Smoothen with a steel trowel, sand paper if so desired with 600 no. of sand paper.

ULTRA Wall Putty Advantages:

  • True color tone of the paint is maintained, primer is not required
  •  Protects expensive paint from dampness, peeling off, flaking 
  • Makes paint durable
  •  Paint finish is superior
  •  Suitable for interior as well as exterior walls

ULTRA WALL CARE COLOUR PUTTY-BENEFITS

01) Reduce your Painting Cost almost 30% approx..

02) Reduce your Painting labour Cost almost 20% approx..

03) No need of primer – saving cost  & Time

04) Available in any colour & shades ( minimum Order level is 25 Bags / per colour )