ULTRA READY MIX PLASTER
ULTRA READY MIX PLASTER Manufactured at a state-of-the-art plant, ULTRA READY MIX PLASTER is a blend of Portland cement, fine graded sand and water soluble, high quality polymer additives for Anti Cracking, in the right proportions. It is ready to use by simply mixing water at the site and can be easily applied on brick, block and concrete.
How to use
The substrate needs to be cleaned and made free from grease and loose particles. The porous and absorbent substrates need to be pre-wetted prior to application of Ultra Ready-Mix Plaster to prevent premature loss of water from the plaster. This will ensure that thin layer can be applied without cracking problems and proper cement hydration and adherence of the mortar to the substrate is attained.. Apply plaster to the substrate, using some pressure while finishing with a steel trowel or wooden float to ensure optimum bonding of the plaster to the substrate surface.
- Internal & External Plastering Application
- External Application like Brick laying, Brick Joints filling & Exterior Wall Plastering
- Internal Application like, Interior Walls, Ceiling Areas & Brick Joints
Unichem industries started it’s business activity in the year 2009 as a partnership based firm with 14 employers in a 3500 sq.ft factory we are 4500 sq.ft factory area.
ADVANTAGES
1.Internal & External Plastering Application.
2.External Application like Brick laying,Brick Joints filling & Exterior Wall Plastering
3.Internal Application like,InteriorWalls,CeilingAreas & Brick Joint
•Reduces water consumption drastically compared to traditional plaster because of its inherent strength.
• Ensures substantial reduction in repairs and maintenance costs, while also enhancing the life of the paint.
• Its unique features and properties set ULTRA READY-MIXPLASTER faster & requires less mixing time.
•This process eliminates jobsite mixing practices. Hence it gives consistent quality with required sand mesh sizes in
exact portion which is most important for durability of a plaste.
TECHNICAL SPECIFICATIONS:
PERFORMANCE OF PARAMETERS | TRADITIONAL PLASTER | ULTRA READY MIX PLASTER |
PENETRATION OF RAIN WATER | Large particle(>3mm) sand leads to porous surface and gives easy access to Rain water | Different grade of sand used in exact proportion ensuring compactness in plaster (1.18 mm to 75 Mic) |
ADHESION | High silt and chloride content in sand impedes adhesion properties in mortar, causing high de-bonding losses | Negligible silt and organic matter free plaster, ensure strong adhesion and durability |
DE-BONDING LOSSES | High | Negligible |
SMOOTHNESS | Not so smooth | Smooth and hard surface provides aesthetic base of plaster to work upon |
CRACK FORMATION | Due to practical on site un-uniform mixing, chances of Crack formation is more | ULTRA Ready Mix Plaster produced at automated uniform dry mix plant, and also with Anti cracking material, chances of is very negligible subjected to proper Curing and application |
GRADING OF SAND | No Grading | Ultra Ready Mix Plaster has graded sand as per IS Standard, which results compactness of plaster |
CEMENT AND SAND RATIO | Mistake may occur at job site mix | Sand and Cement Ratio is maintained as is made is automated plant |
POLYMER MODIFICATION | Polymer modification is difficult as it involves multiple polymers and doses | Polymers already added, which will give you results in overall durability |
ADVANTAGES
Further to have desired work ability, less rebounding losses, required slump properties and overall durability, polymers are added in Ultra Ready-Mix Plaster. A good plaster needs to have a strong adhesion on wall and ceiling with excellent water resistance, crack free & workability properties. This will protect the interior and exterior of the plastered surface. It also provides flat base for painting, minimises the inconvenience of maintenance & speeds up the construction.
TESTING REPORTS:
TEST | TEST METHODS | OBSERVATION |
SETTING TIME – INITIAL | AS PER IS 4031 PART -5:1988 | >=36 MIN |
SETTING TIME – FINAL | AS PER IS 4031 PART -5:1988 | <=634 MIN |
POT LIFE, MINUTE | – | 42 |
WATER RETENTIVITY | AS PER EN-1015-8 | 98.5% |
COMPRESSIVE STRENGTHMPa | AS PER EN 1015- 11:1999 | 5.24 |
FLEXURAL STRENGTH | AS PER EN 1015- 11:1999 | Min 2.24Mpa |
ADHESION STRENGTH | AS PER EN 1015- 11 | 1.28 MPa |
SHELFLIFE
• Factory sealed bags of this product are guaranteed to be of first quality.
• 9 months before opening,3 days after opening
*If stored off the ground in a dry area,at 21degree C and 50%RH.
*High humidity will reduce the shelf life of bagged product.
Packaging : 50kgs bag