Ultra Bond Premium

ULTRA BOND – REGULAR Adhesive is cementations thin-set adhesive designed for the installation of ceramic tile and natural stone on the floor and wall.

How to use

Mix the Ultrra Bond Diamond-UB-310powder with clean water in 4:1 ratio of their weights, until a lump free smooth paste of uniform mix is obtained. Use heavy duty slow speed (less than 300 rpm) electrical drilling machine with spiral paddle attached. Thus, obtained mix has 3hrsofpotlife.Spread the adhesive on floor (at 6mm thick)and wall(at 3mm thick)using suitable steel notch trowel. Press the tiles firmly into thepositions(Notmorethan1Sq.mt a time)with a slightly twisting action and use suitable rubber mallet for gentle tamping.

Use spacer of required size to maintain the uniform joint width (Joint gaps of at least of 3mm shall be provided to facilitate movement) Tiles have to be fixed within15 min and can be adjusted up to 5-10min@27 10C.Touch the ribs of the applied adhesive periodically, if skin has formed; replace the dry adhesive with fresh adhesive.

Periodically make sure that the tiles are 100% stuck with adhesive. After fixing the tiles, excess adhesive on faces and at joints must be cleaned periodically. After fixing the tiles, excess adhesive on faces and at joints must be cleaned periodically. Grouting can be carried out after 24 hrs

 

Unichem Chennai

Technical Specification

  • BED Thickness - 3 – 12 mm
  • OPEN Time - 30 min
  • POT Life - 2 – 4 hrs
  • Setting Time - 24 hrs
  • Mixing Ratio - 5 – 6 L of Water / 20 kg
  • Packing - 20 kgs
  • Colour - Grey
Bed Thickness
Open Time
Pot Life
Seting Time
Mixing Ratio
3 – 12 mm
30 mon
2 – 4 sft
24 hrs
5-6 Liters of water per 20kg

Key Features

  • Dual Purpose – for Floors
  • Easy to Mix and Apply
  • Easy to use – Plastic Consistency
  • Economical
  • Self curing

Suitable Substrate

  • Cement Mortar Beds
  • Cured concrete
  • Cement Plaster
  • Brick Masonry

Advantages

• Polymer modified adhesive.
• Easy mixing and application
•  Good strength
• Suitable for Fixing ceramic tiles for interior floors
• Meets the adhesion Requirements of BS 5980:1980 &
the Indian Standards Is 15477:2004 Type 1 Specification
for Adhesives for use with ceramic tiles and Mosaics”
for fixing of Tiles, Marbles, Granites and Slates in Floors.

Product Description

• Bed thickness: 3-6 mm.
• Floors : Use thick bed trowel
• Pot life @27+10c: 3 Hrs
• Open time @27+10c: 15-20 min
• Setting time @27+10c: 24 Hrs
• Temperature resistance :- 300 to 1500c.
• Tensile adhesion for 14 days: 1.00 kN.

Coverage

Approx 55 – 60 sq.ft per 20 kgs bag when trowelled with 6 mm x 6 mm square notch trowel.Coverage will depend on the nature and flatness of the surface and the method of application. For good coverage, it is vitally important that all surfaces should be clean, smooth, plumb, level and free from defects and undulations