Mix the Ultrra Bond Diamond -UB-610 powder with clean water in 4:1 ratio of their weights, until a lump free smooth paste of uniform mix is obtained. Use heavy duty slow speed (less than 300 rpm) electrical drilling machine with spiral paddle attached. Thus, obtained mix has 3hrsofpotlife.Spread the adhesive on floor (at 6mm thick)and wall(at 3mm thick)using suitable steel notch trowel. Press the tiles firmly into thepositions(Notmorethan1Sq.mt a time)with a slightly twisting action and use suitable rubber mallet for gentle tamping. ”Specification for Adhesives for use with ceramic tiles and Mosaics”

Use spacer of required size to maintain the uniform joint width (Joint gaps of at least of 3mm shall be provided to facilitate movement) Tiles have to be fixed within15minand can be adjustedupto5-10min@27 10C.Touchtheribs of the applied adhesive periodically, if skin has formed;
replace the dry adhesive with fresh adhesive.  

Periodically make sure that the tiles are 100% stuck with adhesive. After fixing the tiles, excess adhesive on faces and at joints must be cleaned periodically. After fixing the tiles, excess adhesive on faces and at joints must be cleaned periodically. For height more than 20 feet, use suitable clamps to hold the tile or stones in position. Grouting can be carried out after 24 hrs.